Posts Tagged ‘studio strings’
Monday, July 6th, 2009
Although we’re often hired to create string arrangements or write string parts, also we’re booked by clients who already have their music scored and just want to hire some reliable session musicians.
Of course, one of the first considerations is how much this is going to cost - and we always stress that the more prepared and organised a studio is, the quicker we can get in and get the work done. Arriving at a studio and finding that the microphones are already set up, the engineer is ready to record and simple things like chairs are in place can all mean that we can simply sit down and record straight away - saving the client time. Time is money and we often arrive early just to make sure everything is set up so that the time we charge for is actually spent playing. From the initial enquiry, if a score (and if possible mp3) can be given to the musicians beforehand, it’s possible to give an accurate estimate of how much time the recording should take, and also to spend a few minutes looking at the score to spot any potential tricky areas that might take more time.
Sometimes - in particular when other instruments are going to be recorded at the same time - it’s hard to estimate how long a recording might take. As we charge a set amount of time per musician for the first two hours (with a reduced hourly rate thereafter), it can be much more economical to get strings added to several tracks on one day. It’s always good to leave the day open - ended without any pressing evening engagements so that if the recording session does over-run it’s all fine.
Once in the studio, one of the musicians will usually keep popping into the booth just to hear back what’s just been recorded and check for any tiny imperfections - things that a string player would pick up on - just in case the producer and engineer may not have heard it - it’s far better to quickly fix any small adjustments in tuning, tone or phrasing at the earliest stage possible, before any post production work has been done.
With developed ears for recording work and experience of how to get the best string tone in front of a microphone, the best session players are able to adjust the tone quality of their instruments to fit in with the ‘feel’ of each individual track.
Tags: hiring professional musicians, recording musicians, Recording studios, session musicians, session string players, studio musicians, studio strings
Posted in Recording Projects | No Comments »
Monday, June 29th, 2009
Many of the jobs that we’ve worked on have been for clients who have sent us string parts they’ve written themselves from a midi file. Scoring from midi requires no knowledge of music theory or written notation and often involves the composer playing parts into a keyboard and then printing off the results.
Whilst this is a useful tool in many situations, it rarely produces results that sound convincing for string players once we’re in the studio. Here’s an example: If the composer has little knowledge of the different musical clefs then a cello part can be printed off in a treble clef. As the range of the cello extends lower than the treble clef can accommodate, we’ve been handed parts with about 10 ledger lines at the bottom of the stave, the notes overlapping the stave below - almost impossible to read. The other problem with playing chords in via a keyboard is that it ends up quite ‘fixed’ with no ‘feel’ and the inner parts don’t have a satisfying musical line - therefore so much of the potential from using live strings is lost.
Writing for any collection of instruments is all about the individual line of each instrument. If the parts are moving in chords, each part sounds best when it is playing a melody that harmonises with the rest of the parts in the piece or track.
Very often, expensive studio time can be wasted whilst session musicians sit around re-writing scored midi parts until they are both readable and playable, so as a matter of course we now do ask clients to send through midi-created parts so that we can tidy them up before the session, and save everyone time and money. We charge a nominal fee of £40 per hour for this - the same fee as for string arranging from the original track in the first place.
Although it might seem cheaper to create parts using a midi, it can be just as quick and economical to hire a string arranger to score the parts properly for strings in the first place - and results will be more effective with creative harmonies and melodic lines written in to add richness. As an example, paying a string arranger £40 per hour to spend a couple of hours correctly notating and orchestrating will potentially save hours in the studio and the musicians will be able to go in and just play everything right first time from a properly written score, using each instrument to it’s full potential.
Tags: Adding string parts, chords for strings, cost of a string arranger, creating a score from midi, midi strings, notation fees, Orchestrating for strings, orchestration fees, orchestrator, scoring from midi, session musicians, session string players, string accompaniment, string arrangement costs, string arranger, string arranger fees, String Arranging, studio musicians, studio strings, writing for string section, Writing for stringed instruments
Posted in String Arranging | No Comments »
Tuesday, June 9th, 2009
One of the most wide ranging techniques on a bowed stringed instrument is what is commonly referred to as staccato. In essence, staccato is where the notes are short and spiky - this can be achieved in different ways. The Martele (pronounced mart -el-lay) bow stroke is where the bow is gently pressed to the string and released rapidly to create a little ‘kick’ or accent at the beginning of each note. It can be played rapidly or slowly and there is generally a small gap between each note. Whereas this would be rarely applied for a commercial string session on a pop or rock track, it could be used in a more classical sound - perhaps for a film soundtrack or television production.
The spiccato bow stroke is what is commonly referred to as ‘off the string bowing’ because the bow leaves the string at the end of each stroke. This gives the music a distinctive sound which can be used in a variety of different context as it’s so versatile. Spiccato bowing is great for rapid scales and will create a ‘brilliant’ effect (as in bright) or could be applied in a slower and heavier passage to add drama.
Adding variety with spiccato and martele bowings can accentuate the strings by using the whole section, or just one group of instruments (for example, only violas) and both are widely used ways of adding interest or energy when orchestrating for strings.
Tags: Adding string parts, dramatic string parts, martele bowing, Orchestrating for strings, orchestration, orchestrator, session musicians, session string players, spiccato bowing, spiky string parts, string arranger, String Arranging, studio strings, violinist, writing for string section, Writing for stringed instruments
Posted in String Arranging | 1 Comment »
Friday, June 5th, 2009
This week we contributed to two contrasting recording projects - one for some final year students at SAE in Oxford where the studio was absolutely state of the art and the particular studio we were in used a lot of analogue recording equipment including an old analogue valve mixing desk. The recording was part of an assignment for the students and their brief was to record 4 acoustic instruments on top of guitars / drums etc, with three tracks all in all. The session involved some music which was already scored and some which we were asked to improvise in order to fulfill the assignment brief.
On Monday we were asked for something totally different - working with a talented singer songwriting partnership who needed string quartet parts adding to some tracks which were almost finished. As I’d been asked to arrange the strings for two of the tracks, we’d been working together all week via email with small adjustments to get the strings sounding as close to the composers ideas as possible - this is a process which requires patience as often several revisions are needed before the song is ‘just right’. It’s always gratifying to get into the studio and finally record the parts - and after all the careful arranging work, we laid down the strings at the Dairy Studios in Brixton. The session ran smoothly and we recorded three songs with very few ’second takes’ needed. Although the majority of the music was scored for string quartet, there were a few bars where the sound needed to be thickened up with an extra violin or viola part, so I stayed on and carefully overdubbed a few phrases at the end to give a larger string sound.
Tags: Adding string parts, adding strings to a song, Dairy Studios, Improvising session musicians, Orchestrating for strings, orchestrator, Recording studios, SAE, session musicians, session string players, string arranger, String Arranging, String quartet, studio musicians, studio strings, writing for string section, Writing for stringed instruments
Posted in Recording Projects | No Comments »
Tuesday, May 26th, 2009
Pizzicato is simply a technique where the strings are plucked rather than bowed (arco). It is a great tool to add variety to a piece and can enhance the rhythmic vitality of a section. As the tension of violin strings is higher than that on guitars, plucked notes tend to give an immediate response with a slightly ‘tight’ sound and a rapid decay.
When used in a full string section, pizzicato can cut through other textures without sounding abrasive, but can also be used to add a touch of humour or quirkiness to a song. Often single notes can be picked out or plucked as part of a counter melody, or if a single chord needs to be struck, 2, 3 or even 4 notes can be simultaneously plucked. In this instance, a knowledge of the tuning of stringed instruments is needed as the spacing of the chord is unique to the string family (being tuned in fifths). A string arranger has to take into account that on a given chord, there is a big spread of notes and it’s important to know which finger takes each string so that the chord ends up being playable by your session musicians.
When writing for stringed instruments, it’s always important to keep in mind how the four strings are tuned unless the lines are very simple. If the parts have been written on a keyboard, they may not necessarily be playable on a violin, viola or cello so unless the composer is a professional string arranger, having a string player check them through is advisable before entering the studio.
Although usually used sparingly, adding some pizzicato effects can be a great way to bring some bounce and life to a string arrangement. Plucked strings can be soft and subtle or really dramatic.
Tags: Adding string parts, appropriate string parts, arranging for violin, composer, orchestrating, Orchestrating for strings, orchestrator, Pizzicato, plucked strings, session musicians, session string players, string arranger, String Arranging, String orchestra, studio musicians, studio strings, violinist, writing for string section, Writing for stringed instruments
Posted in String Arranging | No Comments »
Wednesday, May 20th, 2009
Adding a mute to a stringed instrument has a very different effect from muting a brass instrument. Although by definition, a mute does take off a little of the volume, rather than just making the violin quieter, it can make the sound more mellow and add a subdued quality. Adding a mute is an excellent tool where the harmonies are complex and slow moving - or where the arranger would like a wash of strings to add a special ambiance.
A mute is a small piece of either plastic or wood which sits between the strings and the tailpiece of the instrument - it can be slid up on top of the bridge to restrict the vibration - thus creating a less piercing sound. The Italian musical term for adding a mute is ‘Con Sordino’ and the instruction ‘Senza Sordino’ means to take the mute off again.
When scoring for strings and using mutes, it’s important to allow a few seconds either side of adding or removing one so that the player has a chance to move the mute on or off.
Although it’s possible to just mute some of the instruments in the section, the effect is more striking if all the strings are muted simultaneously - this can really add interest, variety and a whole different sound to the strings.
Tags: Adding string parts, arranging for violin, cello mutes, con sordino, haunting strings, muted strings, mutes, Orchestrating for strings, orchestrator, senza sordino, session string players, soft string sound, string accompaniment, string arranger, String Arranging, String orchestra, studio strings, viola mutes, violin mutes, writing for string section, Writing for stringed instruments
Posted in String Arranging | No Comments »
Tuesday, April 28th, 2009
One of the most common ways in which strings are added to a track is through the provision of chords. There are in essence three basic ways of using a chord in music.
One is called a ‘root’ chord, the others are a ‘first’ or ’second’ inversion of a chord. If the chord in question is in C major and the note C is placed at the bottom, then this is a ‘root chord’ of C. If the next note in the chord (E) is placed at the bottom, this is a ‘first inversion’ and if the third note of the chord (G) is at the bottom, this is a ’second inversion’ of the chord.
When arranging for strings, inversions add variety to the harmony and give the opportunity for all the parts to move in a musical way. What this means is that you can have an inner part (viola or second violin) moving in step so that when the session musicians play just that part, it has a logical and satisfying musical line to it and doesn’t just jump around randomly.
This is crucial when writing a bass line as it underlines the entire harmony and has to flow as a line of music in it’s own right (as well as fitting with the individual chords).
Sometimes, chords may all be grouped quite close together with the parts low in their register - this is when the rest of the track may have a ‘hole’ in that register which needs filling by the strings. In other situations, the gaps between the individual notes of the chord might be very wide and spaced apart - when a more sparse texture is needed. It’s always possible to thicken or thin out the texture of the strings by doubling notes in different registers (a careful use of double stops), or by not using all the notes in the chord.
A double stop is where two notes are played simultaneously on any given instrument. As the celli, violas and violins are all tuned in fifths, the interval of a fourth, fifth, sixth and octave can all work well. When it comes to thirds, these work better in the violin and viola parts than they do with a cello, but your studio musicians won’t thank you if both the notes in the third are written on the same string!
Other chords which require more than three notes in them are seventh chords (again in the chord of C this would be C, E, G and a Bb on the top), or diminished chords - which are a succession of minor thirds spaced one on top of another.
Jazz chords are a whole area in themselves where the arranger needs to have a good knowledge of harmony and be able to hear the chords in order to arrange around them.
In the next blog entry, I’ll be writing about the effective use of pedal notes.
Tags: Adding string parts, appropriate string parts, arranging for violin, chords for strings, orchestrating, Orchestrating for strings, orchestrator, session musicians, session string players, string accompaniment, string arranger, String Arranging, String orchestra, studio musicians, studio strings, writing for string section, Writing for stringed instruments
Posted in String Arranging | No Comments »
Saturday, April 11th, 2009
It’s always nice to tackle more involved projects requiring strings and this week we certainly got the chance to do just that with an intricate, 8 minute long track that needed a really large string sound.
I’d been asked to arrange the strings with a particularly epic climactic section which had a 5/4 beat but also triplets running through it - this had the feeling of two different time signatures simultaneously and I was concerned it might sound chaotic, but we took great care when recording and actually it worked really well. The parts were scored for 3 violin sections, often with double stopped notes to thicken out the chords - with the violas & celli adding a rhythmic base for the violins to bounce off. Some of the passages required different techniques such as tremeloes and powerful spiccato strokes with accents and once recorded, gave the impression of a much bigger string orchestra.
We’re looking forward to hearing the final result once all the post production & mastering has been done.
Tags: Adding string parts, Large string sound, notation, orchestral instruments, orchestrating, Orchestrating for strings, String Arranging, String orchestra, studio strings, writing for string section
Posted in Recording Projects | No Comments »
